A guide to roofing conditions

Replacing your existing roof or considering your options for a new one can be a daunting task. In the UK it is important to keep in mind the Article 4 guidelines and whether your building is listed as these factors can often tell you what a roof should look like. An experienced roof is essential for any such work, but knowing the terminology of the roof apart from the difference between ‘slate’ and ’tiles’ can certainly make the process a little easier, and you can get started. A good idea of ​​the shape of your roof can help. Planning Steps Here’s a quick guide to some of the lesser known roofing terms.

Roofing felt is primarily used to protect the inside of your roof from any rain, snow or dust that can occasionally be blown through the air with small gaps between slates or tiles. Different fillets vary in quality and ‘weight’ and it is important to consider whether breathable or non-breathable material will be suitable for your home due to potential sensation issues. If you frequently use radiators or tumble dryers in your home, non-breathable felt should be used to make sure your roof is well ventilated.

the valley
The valley is the line where two sloping roofs meet. Obviously there is an area of ​​the roof where a lot of water will flow during the wet season, so it is common to line the valley with a more sophisticated glass fiber material called lead or glass reinforced plastic (GRP). Is an exercise .

In visual terms, the crusher is very much like the opposite of the valley where one side of the roof meets the other. Of course, any roof hip also needs to be cleaned and this can be achieved in a variety of ways with lead (exterior or invisible) as well as clay or concrete tiles.

The edge is used to describe slates or tiles that overhang a gable and are fixed vertically over the building wall. These are an aesthetically pleasing way to weather this particular part of the building and often end with alternatives such as slates or boarding on a mortar bed.

Batons are wooden fixing points for your tiles and slates. Bats are usually tanned or stress treated for durability and to ensure that they are not damaged by water and other potential problems, such as fungus or insects.

Leave a Reply 0

Your email address will not be published. Required fields are marked *