GFRC (Glass Fiber Reinforced Concrete) Cleaning

The best solution is to have a clean finish project at the end of the construction to avoid stains during the construction project. GFRC must be protected after storage, setting and installation. The GFRC should be stored out of the ground on stained boards or pallets. The GFRC (Glass Fiber Reinforced Concrete) storage site should be out of the way of heavy construction traffic. If the GFRC is to be stored for a long time, it should be placed on pallets and covered with stained tarps or plastic. Once installed, GFRC polyester, columns, windows, panels, etc. must be protected from non-plastic stains during the rest of the construction.

After construction, final washing may be required. The use of acid or brick cleaners is not recommended. The most common stain of construction is dirt. Dirt can be removed from GFRC (Glass Fiber Reinforced Concrete) by rubbing with mild soap and water. When dealing with other scars, the most important step is to identify the scar and its cause. Any treatment used to clean the GFRC should be tested in a small obscure area before cleaning the critical units.

No power washing and sand blasting or recommended procedures for cleaning GFRC (Glass Fiber Reinforced Concrete). Metal fiber brushes should not be used to clean GFRC (glass fiber reinforced concrete), they can stain the surface, and small pieces of metal residue from the brush will rust after being left on the GFRC. May look or feel bad and may have scars.

Leave a Reply 0

Your email address will not be published. Required fields are marked *