Lofting Shed Construction – The process of building a wooden shed for horses

Horses need more protection than the elements of nature, and having a loafing shed can give them the protection they need. The design is easy to find and just as easy to create with the right tools and materials.

Tools and materials required.

  • 4 – 12x4x4 posts
  • 2×4 pieces of wood
  • Siding
  • Roof nails
  • Regular nails
  • A hammer
  • Concrete mix
  • Sandbags

Creating a foundation: Start by measuring the area where the corner posts will go, the regular size is 12×12 feet. Drill holes up to 36 inches deep for posts for 4×4 pieces. Insert the posts into the holes in the concrete and let them sit for 72 hours until the concrete dries.

Construction of walls: Make the walls with 2×4 pieces on three sides, starting from about 4 “above the ground level to the top of the lines. Make sure you leave a small space near or above the shed for ventilation purposes. Make a frame, which is basically 2×4 nails to each other from the post on each corner, basically for each corner of the roof.

Roof construction: The rear and front pieces of siding have to be nailed to the roof framework. This can be done using regular nails. Make sure everything is equal and safe. Lay the siding pieces down using the overlapping method to ensure that the water flows without any hassle. Use roofing nails to join the siding pieces together to make the roof of the lofting shed more stable. Siding materials can be tin, corrugated metal or plastic.

Flooring: Spread your sandbags on the floor inside the shed, 6 “deep or more. One of the things you should keep in mind while doing this is sharp or open nails. We want to make sure that nothing sticks to the outside, so that your horses are safe and secure on the inside.

Additions to the shade: Since horses and other animals usually live in this type of shed, you can also add grass hatches, double doors, windows, Dutch doors, full walls, doors, etc.

Adding grass racks: This is a place that can be used to feed grass or other animals. It is kept away from the ground to avoid moisture. Installing one in your shed, if you make it for horses or other animals, would be the best option. Make your base by taking plywood and laying it down, then drill three holes at a distance of 1-1 / 2 feet. 3 Take 2×4 and drag them into the holes to make one side of the rack.

To make the other side, make 3 more holes of the same size and apart from the same distance, but on the opposite side. Screw in 3 more 2×4 holes, like the other side, to make the other side. It will be the “backbone” of the rack and your base. Pull another 2×4 piece into the top of the others and drill into the other two pieces that make up a large space.

Leave the rest open and now you are ready to put your bale inside. Your loafing shed is now complete and ready for horses.

Leave a Reply 0

Your email address will not be published. Required fields are marked *