Tips on how to apply epoxy floor coating

Epoxy floor coatings have long been used to beautify concrete floors and protect them from damage. Due to its hardness and durability, it is commonly used on industrial floors. In addition, it is known to be resistant to oils, greases and other chemicals that can destroy floors. In the early years, epoxy floor coating was used only in commercial goods stores, but in recent years, it has become a trend in home and garage use.

Many homeowners will want to apply an epoxy floor coating, but you can still get it done yourself. This is how

First, you need to measure your floor to find out how much epoxy floor coating you need to buy. After that, you need to buy an epoxy paint and an epoxy paint hardener – it will probably be given to you in a package. Never get confused with outdoor and indoor epoxy paint as well as swimming pool epoxy paint. Ask the person in charge of the market for paints what kind of purchase you need. Alternatively, you can buy a floor coating kit online with a DVD manual.

It is important to clean the floor as well as possible. Wash the floor with water and dish soap, then let it dry. If you find it difficult to clean the floor from grease stains, you can buy a degreaser from a hardware store. Let the degreaser do its work then clean it with a cloth and wash it with water.

Scratch the floor You should wear protective gloves and a mask when doing this because it involves the use of moritic acid. Mix muric acid and water and wash with cold water. One cup of muric acid is enough for one gallon of water. Do not use a cloth to apply the mixture, use a stick broom instead.

If you have a manual, you know how many hardeners and epoxy paints you will need. Mix the two for about 5 minutes and leave for 30 minutes.

For good coating in cracks, it is first necessary to paint the edges using a small brush. Use rolling paint to spread the mixture on the floor. Be sure to keep the application clean. In other words, you should start with a corner. Never leave areas. And after 24 hours, you now have the epoxy floor coating – you do it yourself.

Leave a Reply 0

Your email address will not be published. Required fields are marked *